Fixes and new sample config files for VxWorks

4 files changed, 350 insertions, 4 deletions

diff --git a/dist/etc/vxworks/config-6.4-max.make b/dist/etc/vxworks/config-6.4-max.make
index 39ec8ae..17a597a 100644
--- a/dist/etc/vxworks/config-6.4-max.make
+++ b/dist/etc/vxworks/config-6.4-max.make
@@ -10,8 +10,9 @@
 # $ cd examples/cxx/hybrid/library/
 # $ make
 # $ mv driver partial-image.o
-# $ nmpentium *.o | tclsh .../vxworks-6.4/host/resource/hutils/tcl/munch.tcl -c pentium > ctdt.c
-# $ ccpentium -O3 -c -fdollars-in-identifiers -fno-zero-initialized-in-bss ctdt.c -o ctdt.o
+# $ export WIND_BASE=.../vxworks-6.4
+# $ nmpentium *.o | tclsh $WIND_BASE/host/resource/hutils/tcl/munch.tcl -c pentium > ctdt.c
+# $ ccpentium -O3 -c -fdollars-in-identifiers -fno-zero-initialized-in-bss -I$WIND_BASE/target/h -I$WIND_BASE/target/h/wrn/coreip ctdt.c -o ctdt.o
 # $ ccpentium -O3 partial-image.o ctdt.o -o driver
 #
 
@@ -19,7 +20,7 @@
 #
 CC       := ccpentium
 CFLAGS   := -W -Wall -O3
-CPPFLAGS :=
+CPPFLAGS := -I$(WIND_BASE)/target/h -I$(WIND_BASE)/target/h/wrn/coreip
 
 CXX      := ccpentium
 CXXFLAGS := -W -Wall -O3
diff --git a/dist/etc/vxworks/config-6.4-min.make b/dist/etc/vxworks/config-6.4-min.make
index 70efda2..f4d49ce 100644
--- a/dist/etc/vxworks/config-6.4-min.make
+++ b/dist/etc/vxworks/config-6.4-min.make
@@ -7,7 +7,7 @@
 #
 CC       := ccpentium
 CFLAGS   := -W -Wall -O3
-CPPFLAGS :=
+CPPFLAGS := -I$(WIND_BASE)/target/h -I$(WIND_BASE)/target/h/wrn/coreip
 
 CXX      := ccpentium
 CXXFLAGS := -W -Wall -O3
diff --git a/dist/etc/vxworks/config-6.7-max.make b/dist/etc/vxworks/config-6.7-max.make
new file mode 100644
index 0000000..2553f13
--- /dev/null
+++ b/dist/etc/vxworks/config-6.7-max.make
@@ -0,0 +1,179 @@
+# Sample configuration file for VxWorks 6.7 on Pentium using the
+# GNU toolchain. This configuration enables STL, iostream, and
+# C++ exceptions which can be disabled if not required.
+#
+# Note that iostream support requires static initialization so
+# you will need to 'munch' the examples (and your application)
+# before you can run them. Here are the sample step that are
+# needed to run the C++/Hybrid 'library' example:
+#
+# $ cd examples/cxx/hybrid/library/
+# $ make
+# $ mv driver partial-image.o
+# $ export WIND_BASE=.../vxworks-6.7
+# $ nmpentium *.o | tclsh $WIND_BASE/host/resource/hutils/tcl/munch.tcl -c pentium > ctdt.c
+# $ ccpentium -O3 -c -fdollars-in-identifiers -fno-zero-initialized-in-bss -I$WIND_BASE/target/h -I$WIND_BASE/target/h/wrn/coreip -D_VSB_CONFIG_FILE=\"$WIND_BASE/target/lib/h/config/vsbConfig.h\" ctdt.c -o ctdt.o
+# $ ccpentium -O3 -r -nostdlib -T $WIND_BASE/target/h/tool/gnu/ldscripts/link.OUT partial-image.o ctdt.o -o driver
+#
+
+# Toolchain.
+#
+CC       := ccpentium
+CFLAGS   := -W -Wall -O3
+CPPFLAGS := -I$(WIND_BASE)/target/h -I$(WIND_BASE)/target/h/wrn/coreip -D_VSB_CONFIG_FILE=\"$(WIND_BASE)/target/lib/h/config/vsbConfig.h\"
+
+CXX      := ccpentium
+CXXFLAGS := -W -Wall -O3
+
+LD       := $(CXX)
+LDFLAGS  := $(CXXFLAGS)
+LIBS     :=
+
+# Set RANLIB to empty if your system does not need ranlib.
+#
+AR       := arpentium
+ARFLAGS  := rc
+RANLIB   := ranlibpentium
+
+
+# Common XSD/e flags.
+#
+XSDFLAGS := --generate-inline
+
+
+# Platform. Valid values are:
+#
+# 'wince'  - Windows CE
+# 'win32'  - Windows 2000, XP, etc.
+# 'posix'  - POSIX OS, including UNIX/Linux, VxWorks, etc.
+#
+XSDE_PLATFORM   := posix
+
+
+# Platform architecture width in bits.
+#
+XSDE_ARCH_WIDTH := 32
+
+
+# Platform byte order. Valid values are 'b' for big-endian
+# and 'l' for little-endian.
+#
+XSDE_BYTEORDER  := l
+
+
+# Set to 'n' if you don't have STL (std::string, etc.). Also don't
+# forget to use the --no-stl option when compiling your schemas.
+#
+XSDE_STL        := y
+
+
+# Set to 'n' if you don't have iostream.
+#
+XSDE_IOSTREAM   := y
+
+
+# Set to 'n' if you don't have C++ exceptions. Also don't forget to
+# use the --no-exceptions option when compiling your schemas.
+#
+XSDE_EXCEPTIONS := y
+
+
+# Set to 'n' if your platform doesn't have the "long long int" type or
+# the strtoull function. Also don't forget to use the --no-long-long
+# option when compiling your schemas.
+#
+XSDE_LONGLONG   := n
+
+
+# Set to 'n' if your platform doesn't have the snprintf function.
+#
+XSDE_SNPRINTF   := n
+
+
+# Set to 'n' if you don't want support for XML Schema validation in
+# C++/Parser. Also don't forget to use the --suppress-validation
+# option when compiling your schemas.
+#
+XSDE_PARSER_VALIDATION := y
+
+
+# Set to 'n' if you don't want support for XML Schema validation in
+# C++/Serializer. Also don't forget to use the --suppress-validation
+# option when compiling your schemas.
+#
+XSDE_SERIALIZER_VALIDATION := y
+
+
+# Base parser/serializer implementation reuse style. Valid values are:
+#
+# 'mixin'  - virtual inheritance-based reuse (specify --reuse-style-mixin)
+# 'tiein'  - delegation-based reuse (recommended)
+# 'none'   - no reuse support (specify --reuse-style-none)
+#
+XSDE_REUSE_STYLE := tiein
+
+
+# Set to 'y' if you want support for serialization of the C++/Hybrid
+# object model to the CDR (Common Data Representation) binary format.
+# This functionality requires the ACE library.
+#
+XSDE_CDR := n
+
+
+# Set to 'y' if you want support for serialization of the C++/Hybrid
+# object model to the XDR (eXternal Data Representation) binary format.
+# This functionality requires the XDR API which is available out of the
+# box on most POSIX systems as part of Sun RPC. On some systems (e.g.,
+# (Linux, Mac OS X, iPhone OS) this API is part of libc in which case
+# you don't need to link anything extra. On other platforms, the XDR
+# API may require linking to another library (which you can add to the
+# LIBS variable above), such as -lrpc (QNX, LynxOS) or -lnsl. On non-
+# POSIX platforms you may need to install a third-party library which
+# provides the XDR API. Also note that some older versions of the API
+# (e.g., those found on LynxOS) may not support serialization of the
+# long long type. In this case you will get a compilation error saying
+# that xdr_longlong_t and xdr_u_longlong_t are not declared. One way to
+# resolve this is to disable the use of the long long type in XSD/e (see
+# XSDE_LONGLONG above).
+#
+XSDE_XDR := n
+
+
+# Set to 'y' if you need to handle XML vocabularies that use XML Schema
+# polymorphism (xsi:type or substitution groups). Also don't forget to
+# use either --generate-polymorphic (generates polymorphism-aware code)
+# or --runtime-polymorphic (generates non-polymorphic code that uses the
+# runtime library configured with polymorphism support). Note that support
+# for XML Schema polymorphism requires runtime static initialization
+# support in the C++ compiler (that is, support for automatic calling
+# of constructors for static objects). Furthermore, if the mixin reuse
+# style is used (XSDE_REUSE_STYLE) then the generated code requires
+# support for dynamic_cast.
+#
+XSDE_POLYMORPHIC := n
+
+
+# When polymorphism support is enabled (XSDE_POLYMORPHIC), the following
+# parameters control the substitution and inheritance hashmaps bucket
+# allocation. Because the number of elements in these hashmaps depends
+# on the schemas being compiled and thus is fairly static, these hashmaps
+# do not perform automatic table resizing. To obtain good performance the
+# elements to buckets ratio should be between 0.7 and 0.9. The recommended
+# way to ensure this range is to add diagnostics code to your application
+# as shown in the documentation and examples. It is also a good idea to
+# use prime numbers for bucket counts: 53 97 193 389 769 1543 3079 6151
+# 12289 24593 49157 98317 196613 393241. Inheritance hashmaps are only
+# used when validation is enabled.
+#
+XSDE_PARSER_SMAP_BUCKETS := 53
+XSDE_PARSER_IMAP_BUCKETS := 97
+XSDE_SERIALIZER_SMAP_BUCKETS := 53
+XSDE_SERIALIZER_SMAP_BUCKET_BUCKETS := 53
+XSDE_SERIALIZER_IMAP_BUCKETS := 97
+
+
+# Options tuning depending on the features selected.
+#
+ifeq ($(XSDE_EXCEPTIONS),y)
+CFLAGS += -fexceptions
+endif
diff --git a/dist/etc/vxworks/config-6.7-min.make b/dist/etc/vxworks/config-6.7-min.make
new file mode 100644
index 0000000..93ce134
--- /dev/null
+++ b/dist/etc/vxworks/config-6.7-min.make
@@ -0,0 +1,166 @@
+# Sample configuration file for VxWorks 6.7 on Pentium using the
+# GNU toolchain. This configuration disables STL, iostream, and
+# C++ exceptions which can be enabled if required.
+#
+
+# Toolchain.
+#
+CC       := ccpentium
+CFLAGS   := -W -Wall -O3
+CPPFLAGS := -I$(WIND_BASE)/target/h -I$(WIND_BASE)/target/h/wrn/coreip -D_VSB_CONFIG_FILE=\"$(WIND_BASE)/target/lib/h/config/vsbConfig.h\"
+
+CXX      := ccpentium
+CXXFLAGS := -W -Wall -O3
+
+LD       := $(CXX)
+LDFLAGS  := $(CXXFLAGS)
+LIBS     :=
+
+# Set RANLIB to empty if your system does not need ranlib.
+#
+AR       := arpentium
+ARFLAGS  := rc
+RANLIB   := ranlibpentium
+
+
+# Common XSD/e flags.
+#
+XSDFLAGS := --generate-inline
+
+
+# Platform. Valid values are:
+#
+# 'wince'  - Windows CE
+# 'win32'  - Windows 2000, XP, etc.
+# 'posix'  - POSIX OS, including UNIX/Linux, VxWorks, etc.
+#
+XSDE_PLATFORM   := posix
+
+
+# Platform architecture width in bits.
+#
+XSDE_ARCH_WIDTH := 32
+
+
+# Platform byte order. Valid values are 'b' for big-endian
+# and 'l' for little-endian.
+#
+XSDE_BYTEORDER  := l
+
+
+# Set to 'n' if you don't have STL (std::string, etc.). Also don't
+# forget to use the --no-stl option when compiling your schemas.
+#
+XSDE_STL        := n
+
+
+# Set to 'n' if you don't have iostream.
+#
+XSDE_IOSTREAM   := n
+
+
+# Set to 'n' if you don't have C++ exceptions. Also don't forget to
+# use the --no-exceptions option when compiling your schemas.
+#
+XSDE_EXCEPTIONS := n
+
+
+# Set to 'n' if your platform doesn't have the "long long int" type or
+# the strtoull function. Also don't forget to use the --no-long-long
+# option when compiling your schemas.
+#
+XSDE_LONGLONG   := n
+
+
+# Set to 'n' if your platform doesn't have the snprintf function.
+#
+XSDE_SNPRINTF   := n
+
+
+# Set to 'n' if you don't want support for XML Schema validation in
+# C++/Parser. Also don't forget to use the --suppress-validation
+# option when compiling your schemas.
+#
+XSDE_PARSER_VALIDATION := y
+
+
+# Set to 'n' if you don't want support for XML Schema validation in
+# C++/Serializer. Also don't forget to use the --suppress-validation
+# option when compiling your schemas.
+#
+XSDE_SERIALIZER_VALIDATION := y
+
+
+# Base parser/serializer implementation reuse style. Valid values are:
+#
+# 'mixin'  - virtual inheritance-based reuse (specify --reuse-style-mixin)
+# 'tiein'  - delegation-based reuse (recommended)
+# 'none'   - no reuse support (specify --reuse-style-none)
+#
+XSDE_REUSE_STYLE := tiein
+
+
+# Set to 'y' if you want support for serialization of the C++/Hybrid
+# object model to the CDR (Common Data Representation) binary format.
+# This functionality requires the ACE library.
+#
+XSDE_CDR := n
+
+
+# Set to 'y' if you want support for serialization of the C++/Hybrid
+# object model to the XDR (eXternal Data Representation) binary format.
+# This functionality requires the XDR API which is available out of the
+# box on most POSIX systems as part of Sun RPC. On some systems (e.g.,
+# (Linux, Mac OS X, iPhone OS) this API is part of libc in which case
+# you don't need to link anything extra. On other platforms, the XDR
+# API may require linking to another library (which you can add to the
+# LIBS variable above), such as -lrpc (QNX, LynxOS) or -lnsl. On non-
+# POSIX platforms you may need to install a third-party library which
+# provides the XDR API. Also note that some older versions of the API
+# (e.g., those found on LynxOS) may not support serialization of the
+# long long type. In this case you will get a compilation error saying
+# that xdr_longlong_t and xdr_u_longlong_t are not declared. One way to
+# resolve this is to disable the use of the long long type in XSD/e (see
+# XSDE_LONGLONG above).
+#
+XSDE_XDR := n
+
+
+# Set to 'y' if you need to handle XML vocabularies that use XML Schema
+# polymorphism (xsi:type or substitution groups). Also don't forget to
+# use either --generate-polymorphic (generates polymorphism-aware code)
+# or --runtime-polymorphic (generates non-polymorphic code that uses the
+# runtime library configured with polymorphism support). Note that support
+# for XML Schema polymorphism requires runtime static initialization
+# support in the C++ compiler (that is, support for automatic calling
+# of constructors for static objects). Furthermore, if the mixin reuse
+# style is used (XSDE_REUSE_STYLE) then the generated code requires
+# support for dynamic_cast.
+#
+XSDE_POLYMORPHIC := n
+
+
+# When polymorphism support is enabled (XSDE_POLYMORPHIC), the following
+# parameters control the substitution and inheritance hashmaps bucket
+# allocation. Because the number of elements in these hashmaps depends
+# on the schemas being compiled and thus is fairly static, these hashmaps
+# do not perform automatic table resizing. To obtain good performance the
+# elements to buckets ratio should be between 0.7 and 0.9. The recommended
+# way to ensure this range is to add diagnostics code to your application
+# as shown in the documentation and examples. It is also a good idea to
+# use prime numbers for bucket counts: 53 97 193 389 769 1543 3079 6151
+# 12289 24593 49157 98317 196613 393241. Inheritance hashmaps are only
+# used when validation is enabled.
+#
+XSDE_PARSER_SMAP_BUCKETS := 53
+XSDE_PARSER_IMAP_BUCKETS := 97
+XSDE_SERIALIZER_SMAP_BUCKETS := 53
+XSDE_SERIALIZER_SMAP_BUCKET_BUCKETS := 53
+XSDE_SERIALIZER_IMAP_BUCKETS := 97
+
+
+# Options tuning depending on the features selected.
+#
+ifeq ($(XSDE_EXCEPTIONS),y)
+CFLAGS += -fexceptions
+endif