From 501d6006a26e559d85831b7588404a0c1c1f8d2d Mon Sep 17 00:00:00 2001 From: Boris Kolpackov Date: Mon, 21 Jul 2014 09:46:59 +0200 Subject: Doxygen updates --- doc/cxx/tree/reference/libxsd.doxygen | 1085 ++++++++++++++++----------------- 1 file changed, 527 insertions(+), 558 deletions(-) (limited to 'doc/cxx/tree/reference') diff --git a/doc/cxx/tree/reference/libxsd.doxygen b/doc/cxx/tree/reference/libxsd.doxygen index 376d34a..b98074a 100644 --- a/doc/cxx/tree/reference/libxsd.doxygen +++ b/doc/cxx/tree/reference/libxsd.doxygen @@ -14,198 +14,191 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file that -# follow. The default is UTF-8 which is also the encoding used for all text before -# the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into -# libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of +# This tag specifies the encoding used for all characters in the config file that +# follow. The default is UTF-8 which is also the encoding used for all text before +# the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into +# libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of # possible encodings. DOXYFILE_ENCODING = UTF-8 -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded # by quotes) that should identify the project. PROJECT_NAME = "C++/Tree Mapping Runtime Library" -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = +PROJECT_NUMBER = -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location # where doxygen was started. If left blank the current directory will be used. -OUTPUT_DIRECTORY = +OUTPUT_DIRECTORY = -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would # otherwise cause performance problems for the file system. CREATE_SUBDIRS = NO -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, -# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian, -# Italian, Japanese, Japanese-en (Japanese with English messages), Korean, -# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian, +# Italian, Japanese, Japanese-en (Japanese with English messages), Korean, +# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, # Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. OUTPUT_LANGUAGE = English -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). # Set to NO to disable this. BRIEF_MEMBER_DESC = YES -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the # brief descriptions will be completely suppressed. REPEAT_BRIEF = YES -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" # "represents" "a" "an" "the" -ABBREVIATE_BRIEF = +ABBREVIATE_BRIEF = -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief # description. ALWAYS_DETAILED_SEC = NO -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment # operators of the base classes will not be shown. INLINE_INHERITED_MEMB = NO -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set # to NO the shortest path that makes the file name unique will be used. FULL_PATH_NAMES = NO -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the # path to strip. -STRIP_FROM_PATH = +STRIP_FROM_PATH = -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that # are normally passed to the compiler using the -I flag. -STRIP_FROM_INC_PATH = +STRIP_FROM_INC_PATH = -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful is your file systems +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems # doesn't support long names like on DOS, Mac, or CD-ROM. SHORT_NAMES = NO -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like regular Qt-style comments +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments # (thus requiring an explicit @brief command for a brief description.) JAVADOC_AUTOBRIEF = NO -# If the QT_AUTOBRIEF tag is set to YES then Doxygen will -# interpret the first line (until the first dot) of a Qt-style -# comment as the brief description. If set to NO, the comments -# will behave just like regular Qt-style comments (thus requiring +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring # an explicit \brief command for a brief description.) QT_AUTOBRIEF = NO -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed # description. Set this tag to YES if you prefer the old behaviour instead. MULTILINE_CPP_IS_BRIEF = NO -# If the DETAILS_AT_TOP tag is set to YES then Doxygen -# will output the detailed description near the top, like JavaDoc. -# If set to NO, the detailed description appears after the member -# documentation. - -DETAILS_AT_TOP = NO - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it # re-implements. INHERIT_DOCS = YES -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will # be part of the file/class/namespace that contains it. SEPARATE_MEMBER_PAGES = NO -# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# The TAB_SIZE tag can be used to set the number of spaces in a tab. # Doxygen uses this value to replace tabs by spaces in code fragments. TAB_SIZE = 8 -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". # You can put \n's in the value part of an alias to insert newlines. -ALIASES = +ALIASES = -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list # of all members will be omitted, etc. OPTIMIZE_OUTPUT_FOR_C = NO -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java -# sources only. Doxygen will then generate output that is more tailored for Java. -# For instance, namespaces will be presented as packages, qualified scopes +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for Java. +# For instance, namespaces will be presented as packages, qualified scopes # will look different, etc. OPTIMIZE_OUTPUT_JAVA = NO -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to -# include (a tag file for) the STL sources as input, then you should -# set this tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. -# func(std::string) {}). This also make the inheritance and collaboration +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to +# include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also make the inheritance and collaboration # diagrams that involve STL classes more complete and accurate. BUILTIN_STL_SUPPORT = YES @@ -215,33 +208,33 @@ BUILTIN_STL_SUPPORT = YES CPP_CLI_SUPPORT = NO -# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. -# Doxygen will parse them like normal C++ but will assume all classes use public +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public # instead of private inheritance when no explicit protection keyword is present. SIP_SUPPORT = NO -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default # all members of a group must be documented explicitly. DISTRIBUTE_GROUP_DOC = NO -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using # the \nosubgrouping command. SUBGROUPING = YES -# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct (or union) is -# documented as struct with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically -# be useful for C code where the coding convention is that all structs are +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct (or union) is +# documented as struct with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code where the coding convention is that all structs are # typedef'ed and only the typedef is referenced never the struct's name. TYPEDEF_HIDES_STRUCT = NO @@ -250,247 +243,241 @@ TYPEDEF_HIDES_STRUCT = NO # Build related configuration options #--------------------------------------------------------------------------- -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES EXTRACT_ALL = NO -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class # will be included in the documentation. EXTRACT_PRIVATE = NO -# If the EXTRACT_STATIC tag is set to YES all static members of a file +# If the EXTRACT_STATIC tag is set to YES all static members of a file # will be included in the documentation. EXTRACT_STATIC = NO -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. # If set to NO only classes defined in header files are included. EXTRACT_LOCAL_CLASSES = YES -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. # If set to NO (the default) only methods in the interface are included. EXTRACT_LOCAL_METHODS = NO -# If this flag is set to YES, the members of anonymous namespaces will be extracted -# and appear in the documentation as a namespace called 'anonymous_namespace{file}', -# where file will be replaced with the base name of the file that contains the anonymous +# If this flag is set to YES, the members of anonymous namespaces will be extracted +# and appear in the documentation as a namespace called 'anonymous_namespace{file}', +# where file will be replaced with the base name of the file that contains the anonymous # namespace. By default anonymous namespace are hidden. EXTRACT_ANON_NSPACES = NO -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. # This option has no effect if EXTRACT_ALL is enabled. HIDE_UNDOC_MEMBERS = NO -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various # overviews. This option has no effect if EXTRACT_ALL is enabled. HIDE_UNDOC_CLASSES = NO -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the # documentation. HIDE_FRIEND_COMPOUNDS = NO -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the # function's detailed documentation block. HIDE_IN_BODY_DOCS = NO -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. # Set it to YES to include the internal documentation. INTERNAL_DOCS = NO -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows # and Mac users are advised to set this option to NO. CASE_SENSE_NAMES = YES -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the # documentation. If set to YES the scope will be hidden. HIDE_SCOPE_NAMES = YES -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation # of that file. SHOW_INCLUDE_FILES = NO -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] # is inserted in the documentation for inline members. INLINE_INFO = YES -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in # declaration order. SORT_MEMBER_DOCS = NO -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in # declaration order. SORT_BRIEF_DOCS = NO -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the +# Note: This option applies only to the class list, not to the # alphabetical list. SORT_BY_SCOPE_NAME = NO -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo # commands in the documentation. GENERATE_TODOLIST = YES -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test # commands in the documentation. GENERATE_TESTLIST = YES -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug # commands in the documentation. GENERATE_BUGLIST = YES -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting # \deprecated commands in the documentation. GENERATE_DEPRECATEDLIST= YES -# The ENABLED_SECTIONS tag can be used to enable conditional +# The ENABLED_SECTIONS tag can be used to enable conditional # documentation sections, marked by \if sectionname ... \endif. -ENABLED_SECTIONS = +ENABLED_SECTIONS = -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or define consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and defines in the -# documentation can be controlled using \showinitializer or \hideinitializer +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer # command in the documentation regardless of this setting. MAX_INITIALIZER_LINES = 30 -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the # list will mention the files that were used to generate the documentation. SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = NO - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from the -# version control system). Doxygen will invoke the program by executing (via -# popen()) the command , where is the value of -# the FILE_VERSION_FILTER tag, and is the name of an input file -# provided by doxygen. Whatever the program writes to standard output +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from the +# version control system). Doxygen will invoke the program by executing (via +# popen()) the command , where is the value of +# the FILE_VERSION_FILTER tag, and is the name of an input file +# provided by doxygen. Whatever the program writes to standard output # is used as the file version. See the manual for examples. -FILE_VERSION_FILTER = +FILE_VERSION_FILTER = #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- -# The QUIET tag can be used to turn on/off the messages that are generated +# The QUIET tag can be used to turn on/off the messages that are generated # by doxygen. Possible values are YES and NO. If left blank NO is used. QUIET = NO -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank # NO is used. WARNINGS = YES -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will # automatically be disabled. WARN_IF_UNDOCUMENTED = YES -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that # don't exist or using markup commands wrongly. WARN_IF_DOC_ERROR = YES -# This WARN_NO_PARAMDOC option can be abled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of +# This WARN_NO_PARAMDOC option can be abled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of # documentation. WARN_NO_PARAMDOC = NO -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could # be obtained via FILE_VERSION_FILTER) WARN_FORMAT = "$file:$line: $text" -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written # to stderr. -WARN_LOGFILE = +WARN_LOGFILE = #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories # with spaces. INPUT = \ @@ -501,102 +488,102 @@ INPUT = \ ../../../../libxsd/xsd/cxx/tree/element-map.hxx \ ../../../../libxsd/xsd/cxx/tree/exceptions.hxx -# This tag can be used to specify the character encoding of the source files that -# doxygen parses. Internally doxygen uses the UTF-8 encoding, which is also the default -# input encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding. +# This tag can be used to specify the character encoding of the source files that +# doxygen parses. Internally doxygen uses the UTF-8 encoding, which is also the default +# input encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding. # See http://www.gnu.org/software/libiconv for the list of possible encodings. INPUT_ENCODING = UTF-8 -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 -FILE_PATTERNS = +FILE_PATTERNS = -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. # If left blank NO is used. RECURSIVE = NO -# The EXCLUDE tag can be used to specify files and/or directories that should -# excluded from the INPUT source files. This way you can easily exclude a +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. -EXCLUDE = +EXCLUDE = -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or -# directories that are symbolic links (a Unix filesystem feature) are excluded +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix filesystem feature) are excluded # from the input. EXCLUDE_SYMLINKS = NO -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. Note that the wildcards are matched -# against the file with absolute path, so to exclude all test directories +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories # for example use the pattern */test/* -EXCLUDE_PATTERNS = +EXCLUDE_PATTERNS = -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the output. -# The symbol name can be a fully qualified name, a word, or if the wildcard * is used, +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the output. +# The symbol name can be a fully qualified name, a word, or if the wildcard * is used, # a substring. Examples: ANamespace, AClass, AClass::ANamespace, ANamespace::*Test EXCLUDE_SYMBOLS = -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see # the \include command). -EXAMPLE_PATH = +EXAMPLE_PATH = -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left # blank all files are included. -EXAMPLE_PATTERNS = +EXAMPLE_PATTERNS = -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. # Possible values are YES and NO. If left blank NO is used. EXAMPLE_RECURSIVE = NO -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see # the \image command). -IMAGE_PATH = +IMAGE_PATH = -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command , where -# is the value of the INPUT_FILTER tag, and is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. If FILTER_PATTERNS is specified, this tag will be +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. If FILTER_PATTERNS is specified, this tag will be # ignored. -INPUT_FILTER = +INPUT_FILTER = -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER # is applied to all files. -FILTER_PATTERNS = +FILTER_PATTERNS = -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source # files to browse (i.e. when SOURCE_BROWSER is set to YES). FILTER_SOURCE_FILES = NO @@ -605,34 +592,34 @@ FILTER_SOURCE_FILES = NO # configuration options related to source browsing #--------------------------------------------------------------------------- -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. If you have enabled CALL_GRAPH or CALLER_GRAPH -# then you must also enable this option. If you don't then doxygen will produce +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. If you have enabled CALL_GRAPH or CALLER_GRAPH +# then you must also enable this option. If you don't then doxygen will produce # a warning and turn it on anyway SOURCE_BROWSER = NO -# Setting the INLINE_SOURCES tag to YES will include the body +# Setting the INLINE_SOURCES tag to YES will include the body # of functions and classes directly in the documentation. INLINE_SOURCES = NO -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code # fragments. Normal C and C++ comments will always remain visible. STRIP_CODE_COMMENTS = YES -# If the REFERENCED_BY_RELATION tag is set to YES (the default) -# then for each documented function all documented +# If the REFERENCED_BY_RELATION tag is set to YES (the default) +# then for each documented function all documented # functions referencing it will be listed. REFERENCED_BY_RELATION = YES -# If the REFERENCES_RELATION tag is set to YES (the default) -# then for each documented function all documented entities +# If the REFERENCES_RELATION tag is set to YES (the default) +# then for each documented function all documented entities # called/used by that function will be listed. REFERENCES_RELATION = YES @@ -644,16 +631,16 @@ REFERENCES_RELATION = YES REFERENCES_LINK_SOURCE = YES -# If the USE_HTAGS tag is set to YES then the references to source code -# will point to the HTML generated by the htags(1) tool instead of doxygen -# built-in source browser. The htags tool is part of GNU's global source -# tagging system (see http://www.gnu.org/software/global/global.html). You +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You # will need version 4.8.6 or higher. USE_HTAGS = NO -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for # which an include is specified. Set to NO to disable this. VERBATIM_HEADERS = YES @@ -662,141 +649,135 @@ VERBATIM_HEADERS = YES # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project # contains a lot of classes, structs, unions or interfaces. ALPHABETICAL_INDEX = NO -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns # in which this list will be split (can be a number in the range [1..20]) COLS_IN_ALPHA_INDEX = 5 -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that # should be ignored while generating the index headers. -IGNORE_PREFIX = +IGNORE_PREFIX = #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will # generate HTML output. GENERATE_HTML = YES -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `html' will be used as the default path. HTML_OUTPUT = html -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank # doxygen will generate files with .html extension. HTML_FILE_EXTENSION = .html -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a # standard header. -HTML_HEADER = +HTML_HEADER = -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a # standard footer. HTML_FOOTER = footer.html -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own # stylesheet in the HTML output directory as well, or it will be erased! -HTML_STYLESHEET = - -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. +HTML_STYLESHEET = -HTML_ALIGN_MEMBERS = YES - -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) # of the generated HTML documentation. GENERATE_HTMLHELP = NO -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. For this to work a browser that supports +# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). HTML_DYNAMIC_SECTIONS = NO -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be # written to the html output directory. -CHM_FILE = +CHM_FILE = -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run # the HTML help compiler on the generated index.hhp. -HHC_LOCATION = +HHC_LOCATION = -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that # it should be included in the master .chm file (NO). GENERATE_CHI = NO -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a # normal table of contents (NO) in the .chm file. BINARY_TOC = NO -# The TOC_EXPAND flag can be set to YES to add extra items for group members +# The TOC_EXPAND flag can be set to YES to add extra items for group members # to the contents of the HTML help documentation and to the tree view. TOC_EXPAND = NO -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and # the value YES disables it. DISABLE_INDEX = NO -# This tag can be used to set the number of enum values (range [1..20]) +# This tag can be used to set the number of enum values (range [1..20]) # that doxygen will group on one line in the generated HTML documentation. ENUM_VALUES_PER_LINE = 4 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be -# generated containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, -# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are +# generated containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, +# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are # probably better off using the HTML help feature. GENERATE_TREEVIEW = NO -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree # is shown. TREEVIEW_WIDTH = 250 @@ -805,74 +786,74 @@ TREEVIEW_WIDTH = 250 # configuration options related to the LaTeX output #--------------------------------------------------------------------------- -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will # generate Latex output. GENERATE_LATEX = NO -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `latex' will be used as the default path. LATEX_OUTPUT = latex -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. If left blank `latex' will be used as the default command name. LATEX_CMD_NAME = latex -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the # default command name. MAKEINDEX_CMD_NAME = makeindex -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to # save some trees in general. COMPACT_LATEX = NO -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, a4wide, letter, legal and +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and # executive. If left blank a4wide will be used. PAPER_TYPE = a4wide -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX # packages that should be included in the LaTeX output. -EXTRA_PACKAGES = +EXTRA_PACKAGES = -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a # standard header. Notice: only use this tag if you know what you are doing! -LATEX_HEADER = +LATEX_HEADER = -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references # This makes the output suitable for online browsing using a pdf viewer. PDF_HYPERLINKS = NO -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a # higher quality PDF documentation. USE_PDFLATEX = NO -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. # This option is also used when generating formulas in HTML. LATEX_BATCHMODE = NO -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) # in the output. LATEX_HIDE_INDICES = NO @@ -881,68 +862,68 @@ LATEX_HIDE_INDICES = NO # configuration options related to the RTF output #--------------------------------------------------------------------------- -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with # other RTF readers or editors. GENERATE_RTF = NO -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `rtf' will be used as the default path. RTF_OUTPUT = rtf -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to # save some trees in general. COMPACT_RTF = NO -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. # Note: wordpad (write) and others do not support links. RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide # replacements, missing definitions are set to their default value. -RTF_STYLESHEET_FILE = +RTF_STYLESHEET_FILE = -# Set optional variables used in the generation of an rtf document. +# Set optional variables used in the generation of an rtf document. # Syntax is similar to doxygen's config file. -RTF_EXTENSIONS_FILE = +RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will # generate man pages GENERATE_MAN = NO -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `man' will be used as the default path. MAN_OUTPUT = man -# The MAN_EXTENSION tag determines the extension that is added to +# The MAN_EXTENSION tag determines the extension that is added to # the generated man pages (default is the subroutine's section .3) MAN_EXTENSION = .3 -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command # would be unable to find the correct page. The default is NO. MAN_LINKS = NO @@ -951,33 +932,21 @@ MAN_LINKS = NO # configuration options related to the XML output #--------------------------------------------------------------------------- -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of # the code including all documentation. GENERATE_XML = NO -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `xml' will be used as the default path. XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_DTD = - -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that # enabling this will significantly increase the size of the XML output. XML_PROGRAMLISTING = YES @@ -986,10 +955,10 @@ XML_PROGRAMLISTING = YES # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental # and incomplete at the moment. GENERATE_AUTOGEN_DEF = NO @@ -998,82 +967,82 @@ GENERATE_AUTOGEN_DEF = NO # configuration options related to the Perl module output #--------------------------------------------------------------------------- -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the # moment. GENERATE_PERLMOD = NO -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able # to generate PDF and DVI output from the Perl module output. PERLMOD_LATEX = NO -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. This is useful -# if you want to understand what is going on. On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller # and Perl will parse it just the same. PERLMOD_PRETTY = YES -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same # Makefile don't overwrite each other's variables. -PERLMOD_MAKEVAR_PREFIX = +PERLMOD_MAKEVAR_PREFIX = #--------------------------------------------------------------------------- -# Configuration options related to the preprocessor +# Configuration options related to the preprocessor #--------------------------------------------------------------------------- -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include # files. ENABLE_PREPROCESSING = YES -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled # way by setting EXPAND_ONLY_PREDEF to YES. MACRO_EXPANSION = YES -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the # PREDEFINED and EXPAND_AS_DEFINED tags. EXPAND_ONLY_PREDEF = YES -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files # in the INCLUDE_PATH (see below) will be search if a #include is found. SEARCH_INCLUDES = YES -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by # the preprocessor. -INCLUDE_PATH = +INCLUDE_PATH = -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will # be used. -INCLUDE_FILE_PATTERNS = +INCLUDE_FILE_PATTERNS = -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator # instead of the = operator. # C++98 version. @@ -1084,239 +1053,239 @@ PREDEFINED = XSD_AUTO_PTR=std::auto_ptr # # PREDEFINED = XSD_AUTO_PTR=std::unique_ptr -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. # Use the PREDEFINED tag if you want to use a different macro definition. -EXPAND_AS_DEFINED = +EXPAND_AS_DEFINED = -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all function-like macros that are alone -# on a line, have an all uppercase name, and do not end with a semicolon. Such -# function macros are typically used for boiler-plate code, and will confuse +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse # the parser if not removed. SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- -# Configuration::additions related to external references +# Configuration::additions related to external references #--------------------------------------------------------------------------- -# The TAGFILES option can be used to specify one or more tagfiles. -# Optionally an initial location of the external documentation -# can be added for each tagfile. The format of a tag file without -# this location is as follows: -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths or -# URLs. If a location is present for each tag, the installdox tool +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool # does not have to be run to correct the links. # Note that each tag file must have a unique name # (where the name does NOT include the path) -# If a tag file is not located in the directory in which doxygen +# If a tag file is not located in the directory in which doxygen # is run, you must also specify the path to the tagfile here. -TAGFILES = +TAGFILES = -# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# When a file name is specified after GENERATE_TAGFILE, doxygen will create # a tag file that is based on the input files it reads. GENERATE_TAGFILE = libxsd.doxytag -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes # will be listed. ALLEXTERNALS = NO -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will # be listed. EXTERNAL_GROUPS = YES -# The PERL_PATH should be the absolute path and name of the perl script +# The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). PERL_PATH = /usr/bin/perl #--------------------------------------------------------------------------- -# Configuration options related to the dot tool +# Configuration options related to the dot tool #--------------------------------------------------------------------------- -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option is superseded by the HAVE_DOT option below. This is only a -# fallback. It is recommended to install and use dot, since it yields more +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option is superseded by the HAVE_DOT option below. This is only a +# fallback. It is recommended to install and use dot, since it yields more # powerful graphs. CLASS_DIAGRAMS = YES -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see http://www.mcternan.me.uk/mscgen/) to -# produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to -# specify the directory where the mscgen tool resides. If left empty the tool is assumed to +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see http://www.mcternan.me.uk/mscgen/) to +# produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to +# specify the directory where the mscgen tool resides. If left empty the tool is assumed to # be found in the default search path. -MSCGEN_PATH = +MSCGEN_PATH = -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented # or is not a class. HIDE_UNDOC_RELATIONS = YES -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section # have no effect if this option is set to NO (the default) HAVE_DOT = NO -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the # the CLASS_DIAGRAMS tag to NO. CLASS_GRAPH = YES -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and # class references variables) of the class with other documented classes. COLLABORATION_GRAPH = YES -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen # will generate a graph for groups, showing the direct groups dependencies GROUP_GRAPHS = YES -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling # Language. UML_LOOK = NO -# If set to YES, the inheritance and collaboration graphs will show the +# If set to YES, the inheritance and collaboration graphs will show the # relations between templates and their instances. TEMPLATE_RELATIONS = NO -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with # other documented files. INCLUDE_GRAPH = YES -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or # indirectly include this file. INCLUDED_BY_GRAPH = YES -# If the CALL_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will -# generate a call dependency graph for every global function or class method. -# Note that enabling this option will significantly increase the time of a run. -# So in most cases it will be better to enable call graphs for selected +# If the CALL_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will +# generate a call dependency graph for every global function or class method. +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected # functions only using the \callgraph command. CALL_GRAPH = NO -# If the CALLER_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will -# generate a caller dependency graph for every global function or class method. -# Note that enabling this option will significantly increase the time of a run. -# So in most cases it will be better to enable caller graphs for selected +# If the CALLER_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will +# generate a caller dependency graph for every global function or class method. +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable caller graphs for selected # functions only using the \callergraph command. CALLER_GRAPH = NO -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen # will graphical hierarchy of all classes instead of a textual one. GRAPHICAL_HIERARCHY = YES -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. DIRECTORY_GRAPH = YES -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # generated by dot. Possible values are png, jpg, or gif # If left blank png will be used. DOT_IMAGE_FORMAT = png -# The tag DOT_PATH can be used to specify the path where the dot tool can be +# The tag DOT_PATH can be used to specify the path where the dot tool can be # found. If left blank, it is assumed the dot tool can be found in the path. -DOT_PATH = +DOT_PATH = -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the # \dotfile command). -DOTFILE_DIRS = +DOTFILE_DIRS = -# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of -# nodes that will be shown in the graph. If the number of nodes in a graph -# becomes larger than this value, doxygen will truncate the graph, which is -# visualized by representing a node as a red box. Note that doxygen if the number -# of direct children of the root node in a graph is already larger than -# MAX_DOT_GRAPH_NOTES then the graph will not be shown at all. Also note +# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the number +# of direct children of the root node in a graph is already larger than +# MAX_DOT_GRAPH_NOTES then the graph will not be shown at all. Also note # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. DOT_GRAPH_MAX_NODES = 50 -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that the size of a graph can be further restricted by +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. MAX_DOT_GRAPH_DEPTH = 0 -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, which results in a white background. -# Warning: Depending on the platform used, enabling this option may lead to -# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, which results in a white background. +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to # read). DOT_TRANSPARENT = YES -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) # support this, this feature is disabled by default. DOT_MULTI_TARGETS = NO -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and # arrows in the dot generated graphs. GENERATE_LEGEND = YES -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate # the various graphs. DOT_CLEANUP = YES #--------------------------------------------------------------------------- -# Configuration::additions related to the search engine +# Configuration::additions related to the search engine #--------------------------------------------------------------------------- -# The SEARCHENGINE tag specifies whether or not a search engine should be +# The SEARCHENGINE tag specifies whether or not a search engine should be # used. If set to NO the values of all tags below this one will be ignored. SEARCHENGINE = NO -- cgit v1.1